30-Day Returns
Free shipping over $99

바구니

당신의 바구니가 비었습니다

쇼핑하러 가기
ORDERS $200+
8% OFF
ORDERS $200+
CODE: Auto
ORDERS $300+
10% OFF
ORDERS $300+
CODE: Auto
ORDERS $400+
12% OFF
ORDERS $400+
CODE: Auto
1 / 2

Rocket Supersonic V2 160A Waterproof Brushless ESC + 4268/4274/4282 4-Pole Sensorless Inrunner Brushless Motor Combo | Power Upgrade Kit for 1/7 & 1/8 RC Monster, Off-Road & Short Course Trucks DJ008

sku:
€115,95 EUR
결제 시 배송비 를 계산
Style
수량

Description

Product Introduction

  • This genuine upgraded waterproof power combo from Rocket consists of Supersonic V2 IP67 fully waterproof 160A brushless ESC paired with multi-size 4-pole inrunner brushless motors (4268/4274/4282). It is engineered for 1/7 and 1/8 scale RC monster trucks, off-road buggies and short course trucks. The whole set supports high-capacity 3S–6S LiPo batteries with high power output and full-sealed waterproof & dustproof construction. Equipped with built-in motor temperature sensor port to enable linked overheat protection with matching ESC, it is an optimal high-performance upgrade option for large-scale RC vehicles.


Basic Info

  • Brand: Rocket RC
  • Item Type: Supersonic V2 160A Waterproof Brushless ESC + 42-Series 4-Pole Sensorless Inrunner Brushless Motor
  • Power Combo
  • Motor Spec: 42mm outer diameter 4-pole sensorless inrunner brushless motor
  • Compatible Vehicles: 1/7, 1/8 RC monster truck, off-road buggy, short course truck, desert truck
  • Available Motor Sizes: 4268, 4274, 4282 (multiple KV options available)


Dimension & Weight
ESC

  • Overall Size: 57.5×45×37mm
  • Net Weight: 150g
  • Power Wire: Pre-installed XT60 connector
  • Motor Wire: Factory fitted 6.5mm gold-plated male banana plugs

Motor

  • Uniform Outer Diameter: 42mm
  • Output Shaft Dia: 5mm (high-toughness alloy steel shaft)
  • Bearing: NMB 625ZZ precision ball bearing
  • 4268: Stator Length 68mm
  • 4274: Stator Length 74mm
  • 4282: Stator Length 82mm
  • Net Weight: 150g


Electrical Parameters
ESC

  • Continuous / Burst Current: 160A / 860A
  • Internal Resistance: 0.00028Ω
  • Supported Battery: 3S~6S LiPo / 9~18S NiMH
  • BEC Output: Switch-mode regulated, switchable dual voltage 7.4V / 8.4V @6A
  • Cooling Fan: Top-mounted high-speed cooling fan

Motor

  • Pole Count: 4-Pole
  • Rated Voltage: Compatible with 3S–6S LiPo
  • Built-in rear TEMP sensor port for linked temperature control with matched ESC


Construction & Material
ESC

  • IP67 fully sealed waterproof & dustproof housing for mud and shallow-water off-road; remove cooling fan before submersion and dry terminals thoroughly after use.
  • Equipped with Infineon MOSFET chips and high-quality Rubycon capacitors for outstanding full-load stability.
  • Hollow airflow shell plus large cooling fan ensures efficient heat control under prolonged heavy load.
  • Full-circuit multi-protection: over-current, low voltage, over-voltage, reverse polarity and overheat protection.
  • V2 upgraded firmware: 1~6 adjustable punch levels (50% higher explosive startup than V1 version), customizable throttle range, low-voltage warning tone, auto power-off after 5 mins idle standby.

Motor

  • Can: CNC machined high-hardness 6061-T6 aluminum with annular cooling ribs for enlarged heat dissipation area.
  • Windings: High-temperature pure copper enameled wire + 0.2mm thickened silicon steel stator laminations to cut power loss and heat buildup.
  • Rotor: Explosion-proof 4-pole silicon steel core with high-density sintered magnets for anti-explosion and high-RPM durability.
  • Shaft: 5mm high-toughness alloy steel drive shaft, impact-resistant and anti-bending.
  • Bearings: Imported dual NMB ball bearings for smooth rotation and low noise.
  • Modular split design for easy disassembly to clean sand/mud and maintain windings & bearings.
  • Pre-fitted 6.5mm gold-plated plugs for anti-oxidation and minimized conductive loss.


Key Features

  • Pre-calibrated factory matching set; ready-to-install after simple wiring for hassle-free aggressive modification.
  • Upgraded V2 waterproof 160A ESC works reliably in rainy and muddy terrain; switchable dual BEC voltage fits high-torque metal servos.
  • High-torque 4-pole motor delivers far stronger torque than standard 2-pole counterparts of equal size, ideal for heavy-load crawling and high-speed big-air jumps.
  • Linked temperature control between motor sensor and matched ESC automatically cuts output at high temperature to prevent coil demagnetization and burnout.
  • Multiple frame lengths and KV selections: low-KV for heavy-duty crawling monster trucks; high-KV for high-speed on-road racing.
  • Standard mounting hole layout enables direct drop-in replacement into stock motor mount without chassis trimming or modification.


Compatible Application

  • Perfect for stock power upgrade of all 1/7 & 1/8 RC monster trucks, off-road buggies, short course trucks and desert trucks.

Return & Exchange Policy Compliant with EU Regulations

Countries Available for Delivery

Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Hungary, Ireland, Italy, Japan, Latvia, Lithuania, Luxembourg, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovakia, Slovenia, South Korea, Spain, Sweden, United Kingdom, United States 

We only accept orders from the countries specified above. For any incorrect orders placed from non-eligible regions, the full payment will be returned to your original payment channel within one business day. 

Rocket Supersonic V2 160A Waterproof Brushless ESC + 4268/4274/4282 4-Pole Sensorless Inrunner Brushless Motor Combo | Power Upgrade Kit for 1/7 & 1/8 RC Monster, Off-Road & Short Course Trucks DJ009 Rocket Supersonic V2 160A Waterproof Brushless ESC + 4268/4274/4282 4-Pole Sensorless Inrunner Brushless Motor Combo | Power Upgrade Kit for 1/7 & 1/8 RC Monster, Off-Road & Short Course Trucks DJ009
Frequently Asked Questions
About Crawltin
CrawlTin isn’t just a parts supplier—it’s a workshop that breathes life into your RC crawler.

We’re obsessed with two things: building battle‑ready custom rigs and making articulated miniature drivers feel alive in the cockpit.

From high‑strength metal performance kits to hyper‑detailed, poseable figures, every screw and weathering scratch tells your off‑road story.

We believe the true soul isn’t in the speed—it’s in the sync between machine and figure: when your driver turns the wheel and the chassis articulates over rocks, that’s your world coming to life.

Whether you’re a first‑time builder or a seasoned scale enthusiast, CrawlTin is your one‑stop destination to craft a custom RC rig with character, emotion, and undeniable presence.
Personal Information & Payment Security
At CrawlTin, we take your privacy and payment security extremely seriously. We will never sell, trade, or share your personal information with any third parties for marketing or commercial purposes. Your private data is strictly protected and will only be shared when absolutely necessary to fulfill your order, such as providing shipping details to logistics carriers for delivery arrangement.
To ensure 100% secure checkout, we only use PayPal and other mainstream official payment gateways. All payment transactions are fully encrypted and processed through certified secure financial systems. Your funds and payment data are completely safe, allowing you to shop with total confidence at CrawlTin.
Do I need to pay customs duties and shipping fees?
At Crawltin, we firmly believe in transparent pricing. The amount you pay at checkout is the total cost you need to bear. Import duties, taxes, and international shipping fees for all orders are fully covered by us. Your package will be delivered directly to you—no additional payments required.

You may also like