BESTILLINGER 200+ USD
8 % RABATT
BESTILLINGER 200+ USD
CODE: BUTIKK1
BESTILLINGER $300+
10 % RABATT
BESTILLINGER $300+
CODE: BUTIKK2
BESTILLINGER $400+
12 % RABATT
BESTILLINGER $400+
CODE: BUTIKK3
Sealed Full Metal Reverse Transmission Gearbox for 1/10 Axial SCX10 RC Crawler Upgrade BX5
sku:
€38,95 EUR
Beregn fraktkostnad i kassen
Mängden
Beskrivelse
Product Subtitle
- All-Metal Reverse Gearbox for SCX10 Crawlers | CNC Aluminum Dust Cover | 48P Steel Gears | High Reduction Ratio for Climbing
Key Features
- Sealed Dustproof Design: CNC-machined aluminum cover effectively blocks dust and debris from entering the gear set, reducing wear and maintaining quiet, efficient transmission performance.
- High Reduction Ratio Configuration: Equipped with 20T/87T 48P steel gears and a 48T wide steel internal gear, delivering a final drive ratio of 11.31:1 for enhanced climbing torque and off-road capability.
- Durable All-Metal Construction: Steel gears paired with an aluminum housing offer superior impact resistance and wear resistance, significantly extending service life compared to stock plastic parts for heavy-duty off-road use.
- Wide Compatibility: Fits 1/10 Axial SCX10 i/Ghost/SCX10 II 90059 and other compatible crawler models, with reverse design optimizing chassis center of gravity and transmission layout.
- Precision Machining: CNC one-piece molding ensures precise mounting holes for direct bolt-on installation with no modifications required, delivering smooth, jamming-free operation.
Product Specifications
- Item Details
- Product Name Sealed Full Metal Reverse Transmission Gearbox
- Compatible Models 1/10 RC Crawlers (Axial SCX10 i/Ghost/SCX10 II 90059 and other compatible models)
- Housing Material CNC-Machined Aluminum Alloy (with Dustproof Cover)
- Gear Material 48P Steel Gears (20T Pinion, 87T Spur, 48T Wide Steel Internal Gear)
- Gear Ratios Pinion/Spur Ratio: 4.35:1; Internal Gear Ratio: 2.6:1; Final Drive Ratio: 11.31:1
- Available Colors Titanium / Black
- Dimensions Height: 69mm × Length: 65mm × Width: 75mm
- Output Shaft Length 6mm
- Output Shaft Diameter 5mm
- Output Shaft Hole 2.4mm
- Pinion Gear Hole 3.2mm
- Product Weight 300g
- Package Includes 1 × Metal Reverse Transmission, 1 Set of Mounting Screws
Package Includes
- 1 × Metal Reverse Transmission Gearbox
- 1 Set of Mounting Screws
Product Photos
- (Insert multi-angle product photos, including front view, side view, close-up details, and installation effect shots)
Installation & Usage Instructions
- Confirm compatibility with your model before installation, and verify mounting hole alignment with your chassis.
- Secure the gearbox with included screws; avoid over-tightening to prevent housing cracking.
- When installing the pinion gear, ensure proper gear mesh and apply a small amount of model gear lubricant to reduce wear and noise.
- After initial installation, perform a low-speed no-load test run to confirm smooth, jamming-free operation before off-road use.
- Regularly clean dust and debris from the cover, and check screw tightness and gear wear periodically.
Land tilgjengelig for levering
Østerrike Belgia Bulgaria Canada Kroatia Tsjekkia Danmark Estland Finland Frankrike Tyskland Ungarn Irland Italia Latvia Litauen Luxembourg Nederland Norge Polen Portugal Romania Slovakia Slovenia Spania Sverige Storbritannia USA
Vi godtar kun bestillinger fra landene som er spesifisert ovenfor. For eventuelle feilaktige bestillinger som legges inn fra regioner som ikke er kvalifisert, vil hele betalingen bli returnert til din opprinnelige betalingskanal innen én virkedag.
Østerrike Belgia Bulgaria Canada Kroatia Tsjekkia Danmark Estland Finland Frankrike Tyskland Ungarn Irland Italia Latvia Litauen Luxembourg Nederland Norge Polen Portugal Romania Slovakia Slovenia Spania Sverige Storbritannia USA
Vi godtar kun bestillinger fra landene som er spesifisert ovenfor. For eventuelle feilaktige bestillinger som legges inn fra regioner som ikke er kvalifisert, vil hele betalingen bli returnert til din opprinnelige betalingskanal innen én virkedag.
- Alle produkter inkluderer gratis frakt og avgifter, ingen skjulte gebyrer.
- Sikker betaling via PayPal, med 100 % banksikkerhet garantert.
- Hver bestilling leveres med logistikksporingsinformasjon.
- Vi bruker krypterte SSL-sertifikater for å sikre 100 % sikre betalinger.
- Alle gelblastere som selges av MYZOOI er i samsvar med EUs EN 71-1 sikkerhetsstandard for leker. Alle relevante produkter har fullført tollbehandling, noe som sikrer null risiko ved tollklarering og problemfri levering av varer.
30-dagers retur-/byttepolicy
Retur- og bytteprosedyre
Fullstendig retur-/byttepolicy
Ingen retur-/byttesaker
Forholdsregler for retur/bytte
Estimated Shipping Widget will be displayed here!
How to Properly Soak Water Gel Beads
- Prepare a container and add plenty of clean water to fully submerge the water gel beads.
- Soak them for 4–6 hours until the beads expand, soften and become fully plump.
- Keep the beads completely under water during the whole process; otherwise, they will not be fully soaked and may easily cause jamming.
- If the soaking time is insufficient or there is not enough water, some water gel beads will not absorb enough water, which may cause poor firing or jamming.
Vanlige spørsmål
Sjekk ofte stilte spørsmål her. Hvis du fortsatt trenger hjelp, kan du kontakte oss på: service@myzooi.com.